LIST OF MATERIALS FOR HULL, DECK & SUPERSTRUCTURE

The following lists of materials are approximate and intended only for calculation of approximate costs. Theyare not intended to be used for the ordering of materials for construction.

Lengths and areas are based on the actual amounts to be used in the vessel without any allowance for building stocks, temporary framing, bracing etc nor for wastage in cutting to size and shape as required. Wastage on flat bars, tubes etc will be minimal whereas that on plate will be dependent on the skill of the builder and will be in the range of 5% to 20%.

MATERIALS FOR STEEL HULL AND DECK

3mm [1/8"] Plate - 30sq.m [323sq.ft]
3.5mm [10 gauge] Plate - 29sq.m [312sq.ft]
4mm [5/32"] Plate - 49sq.m [528sq.ft]
5mm [3/16"] Plate - 4sq.m [43sq.ft]
6mm [15/64"] Plate - 8sq.m [86sq.ft]
8mm [5/16"] Plate - 8sq.m [86sq.ft]
12mm [½"] Plate - 2sq.m [22sq.ft]
6x50mm [1/4"x2"] Flat - 10m [29']
8x30mm [5/16"x1 1/4"] Flat - 28m [92']
8x40mm [5/16"x1 ½"] Flat - 116m [380']
8x50mm [5/16"x2"] Flat - 140m [460']
8x75mm [5/16"x3"] Flat - 56m [184']
8x100mm [5/16"x4"] Flat - 36m [118']
20x100mm [3/4"x4"] Flat - 2m [7']
50x50x6mm [2"x2"x1/4"] L - 2m [7']
102mm [4"] OD tube with 6mm [1/4"] wall - 17m [56']
316 S/S 65mm [2.56"] Round bar - 1.25m [4.1']

MATERIALS FOR ALUMINUM SUPERSTRUCTURE

Plate and sheet is to be alloy 5083-H112 or 5086-H32 and extrusions are to be alloy 6063-T5.

4mm [5/32"] Plate - 72sq.m [775sq.ft]
6mm [1/4"] Plate - 1sq.m (10sq.ft]
16mm [5/8"] Plate - 0.2sq.m [2sq.ft]
3x25mm [1/8"x1"] Flat - 7m [23']
6x25mm [1/4"x1"] Flat - 23m [75']
6x50mm [1/4"x2"] Flat - 28m [92']
8x50mm [5/16"x2"] Flat - 2m [7']
25x50x3 [1"x2"x1/8"] L - 6m [20']
50x50x6mm [2"x2"x1/4"] L - 94m [308']
25x25x3mm [1"x1"x1/8"] T - 108m [354']
75mm [3"] OD tube with 3mm [1/8"] wall - 5m [17']

OUR CONTACT DETAILS

Click here to contact us by whatever method suits you.