DUDLEY DIX YACHT DESIGN

Material List for Didi 950

Radius chine plywood

The following lists of materials are approximate and intended for calculation of approximate costs. We offer no guarantees of accuracy.

TIMBER LIST FOR HULL, DECK, TRANSVERSE BULKHEADS & BUILDING STOCKS

The list below is for construction of woodwork excluding interior joinery and rudders. It covers building stocks, transverse bulkheads, hull framing, hull skin, deck framing and deck skin. Allowance has been made for reasonable wastage and scarphing.
CHIPBOARD (for setting out bulkheads if building from offsets)
1,83x2,74m 16mm [6'x9'x5/8"] - 2 sheets

Either MARINE PLYWOOD 1,22x2,44m [4'x8'] for 9mm Hull Skin Option
3mm [1/8"] - 7 sheets
6mm [1/4"] - 7 sheets
9mm [3/8"] - 49 sheets
12mm [1/2"] - 14 sheets

Or MARINE PLYWOOD 1,22x2,44m [4'x8'] for 12mm Hull Skin Option
6mm [1/4"] - 14 sheets
9mm [3/8"] - 36 sheets
12mm [1/2"] - 27 sheets

PINE or similar (for building stocks etc)
38x38mm [1 1/2"x1 1/2"] (braces) - 13m [43']
38x150mm [1 1/2"x6"] (rails) - 33m [109']
50x75mm [2"x3"] (bulkhead legs) - 35m [115']
100x100mm [4"x4"] or 100mm [4"] dia (posts) - 6m [20']

Cedar or similar, selected, free of knots, shakes fractures etc
22x22mm [7/8"x7/8"] (hatch trimmers) - 3m [10']
22x32mm [7/8"x1 1/4"] (tangent stringers) - 40m [131']
22x44mm [7/8"x1 3/4"] (stringers, hatch trimmers) - 210m [689']
25x25mm [1"x1"] (cockpit coaming fillets) - 10m [33']
25x50mm [1"x2"] (cockpit coaming fillets) - 7m [23']
25x75mm [1"x3"] (sheer clamps) - 20m [66']
32x32mm [1 1/4"x1 1/4"] (cabin roof stringers, cockpit fillets) - 8m [27']
32x127mm [1 1/4"x5"] (bow capping) - 6m [20']
44x44mm [1 3/4"x1 3/4"] (cockpit stiffeners) - 3m [10']

HOME : OVERVIEW : DESIGNS : ARTICLES: EMAIL

OUR CONTACT DETAILS

Click here to contact us by whatever method suits you.

This page was updated 17 November 2013

© Web design by Dix Design