|
Page 2 - Hull stringers
|
|
Stringers to radius area fitted.
In this photo the builder is checking the alignment of the doubler of the tangent stringer with the chamfer planed onto the side of the stem.
|
|
|
All stringers and tangent doublers fitted.
|
|
|
Same stage viewed from aft. This particular boat is to have the stern extended to form a sugar scoop, so the stringers have been run through beyond the transom and will be trimmed to final line with the hull skin.
|
|
|
Sheer clamp fitted. This member fits diagonally across the hull/deck junction and forms the basis of the rounded sheer detail.
|
Back to Didi 26 Notes
|
Back to Didi 26 Notes
|
|
|