|
TIMBER LIST
The following list of materials is approximate and intended for calculation of approximate costs. We offer no guarantees of accuracy.
The list is for all timber in the construction of hull, deck and bulkheads, including building stocks, temporary bracing etc. Allowance has been made in the quantities for wastage.
|
|
MARINE PLYWOOD 1,22x2,44m (4'x8') (preferably Okoume plywood)
6mm (1/4") - 20 sheets
12mm (1/2") - 52 sheets
SAWN PINE (for building stocks etc)
38x38mm (1 1/2"x1 1/2") (braces) - 13m (43')
38x150mm (1 1/2"x6") (rails) - 35m (115')
50x75mm (2"x3") (bulkhead legs) - 33m (108')
100x100mm (4"x4") (posts) - 6m (20')
SOLID TIMBER (meranti, mahogany, Douglas fir or similar, selected, free of knots, shakes fractures etc. Sizes are finished sizes.
12x75mm [1/2”x3”] (laminated beams) – 52m [174’]
20x20mm [3/4”x3/4”] (cleats, framing etc.) – 65m [213’]
30x50mm [1.18”x2”] (sheer clamps) – 25m [82’]
32x44mm [1 ¼”x1 ¾”] (hull & deck stringers) – 220m [721’]
Deadwood formed from available timber sizes (50-75mm thick) [2-3”] – 0.75cu.m [27cu.ft.]
RESIN & GLASS (for coatings and reinforced areas)
Epoxy resin (low viscosity 100% solids) - 150Litres (40 US gal)
150mm (6") Wide glass tape - 1 roll
600g/sq.m Biaxial glass fabric - 50sq.m (538sq.ft)
|