|
TIMBER LIST
The following list of materials is approximate and intended for calculation of approximate costs. We offer no guarantees of accuracy.
The list is for all timber in the construction of hulls and decks, including building stocks, temporary bracing etc. Allowance has been made in the quantities for wastage, with the exception of the building stocks and chipboard, which are net.
|
|
20mm [3/4"] Chipboard - 500x3750mm [19.7x147.74"] (temporary framing)
4mm Marine plywood - 3 1/2 sheets (bulkheads, transoms, upper hull sides, decks)
6mm Marine plywood - 1/2 sheet (beam mounting pads)
16x16mm [5/8x5/8"] Cedar - 32m [105'] (chine steps, sheer clamps)
16x50mm [5/8x2"] Cedar - 7m [23'] (rudders)
22x22mm [7/8x7/8"] Cedar - 12m [36'] (beam bulkhead cleats, deck stringers)
32x44mm [1x1.25"] Cedar - 0.9m [3'] (chainplate doublers)
32x70mm [1.25x3"] Cedar - 1.5m [5'] (Tillers)
32x44mm [1.25x1.75"] Cedar - 0.9m [3'] (stems)
44x44mm [1.75x1.75"] Pine or similar - 1m [3.3'] (temporary framing]
6mm [1/4"] Bead & cove cedar strips - 6.5sq.m [70sq.ft] (lower hulls)
|