|
|
Our thanks to Mark Peterson for supplying this series of build photos of his project, being built in British Columbia, Canada.
First bulkhead set up on building stocks.
|
|
|
All bulkheads set up and backbone in position.
|
|
|
Stringers being fitted.
|
|
|
Sheer clamp being fitted. The cleats to which the sheer clamp is screwed can be seen at the corner of each bulkhead.
|
|
|
All stringers in place and sheer clamp held by bar clamps.
|
|
|
All hull framing completed. The wide stringers are for the junction between the flat hull areas and the radius.
|
|
|
Same stage, looking from the bow.
|
Back to Didi Mini Mk3 Notes
|
Back to Didi Mini Mk3 Notes
|