DUDLEY DIX YACHT DESIGN

Pratique 35 ("Salty Dog II")

Multi-chine or radius chine metal cruiser

GENERAL NOTE

The following lists of materials are approximate and intended only for calculation of approximate costs. They are not intended to be used for the ordering of materials for construction, which should be done from the drawings.

Lengths and areas are based on the actual amounts to be used in the vessel without any allowance for building stocks, temporary framing, bracing etc nor for wastage in cutting to size and shape as required. Wastage on flat bars, tubes etc will be minimal whereas that on plate will be dependent on the skill of the builder and will be in the range of 5% to 20%.

LIST OF MATERIALS FOR MULTI-CHINE STEEL HULL & DECK
3mm Plate (1/8" or 11 gauge) - 56sq.m (602sq.ft)
4mm Plate (5/32" or 8 gauge) - 24sq.m (258sq.ft)
6mm Plate (1/4" or 3 gauge) - 18sq.m (194sq.ft)
10mm Plate (3/8") - 1sq.m (11sq.ft)
30x5mm Flat bar (1 1/4" x 3/16") - 65m (213')
30x6mm Flat bar (1 1/4" x 1/4") - 82m (269')
40x6mm Flat bar (1 1/2" x 1/4") - 78m (256')
60x6mm Flat bar (2 1/2" x 1/4") - 19m (63')
40x40x3mm Angle (1 1/2' x 1 1/2" x 1/8") - 10m (33')
40x40x6mm Angle (1 1/2' x 1 1/2" x 1/4") - 10m (33')
20mm diam Bar (3/4") - 58m (190')
38mm OD x 3mm wall tube (1 1/2" OD x 1/8" wall) - 1m (4')
48,5mm OD x4mm wall tube (1 1/2" Sched 40) - 3m (10')
63,5mm OD x4,5mm wall tube (2 1/2" OD x 3/16" wall) - 3m (10')
76mm OD x5mm wall tube (3" OD x 3/16" wall) - 4m (14')

LIST OF MATERIALS FOR RADIUS CHINE STEEL HULL & DECK
3mm Plate (1/8" or 11 gauge) - 38sq.m (409sq.ft)
4mm Plate (5/32" or 8 gauge) - 28sq.m (301sq.ft) flat and 15sq.m (161sq.ft) radiused
6mm Plate (1/4" or 3 gauge)- 18sq.m (194sq.ft)
10mm Plate (3/8") - 1sq.m (11sq.ft)
30x5mm Flat bar (1 1/4" x 3/16") - 65m (214')
30x6mm Flat bar (1 1/4" x 1/4") - 27m (89')
30x8mm Flat bar (1 1/4" x 5/16") - 125m (410')
40x6mm Flat bar (1 1/2" x 1/4") - 48m (158')
50x6mm Flat bar (2" x 1/4") - 31m (102')
60x6mm Flat bar (2 1/2" X 1/4") - 19m (63')
40x40x3mm Angle (1 1/2" x 1 1/2" x 1/8")- 10m (33')
40x40x6mm Angle (1 1/2" x 1 1/2" x 1/4")- 10m (33')
38mm OD x 3mm wall tube (1 1/2" OD x 1/8" wall) - 1m (4')
48,5mm OD x4mm wall tube (1 1/2" Sched 40) - 3m (10')
63,5mm OD x4,5mm wall tube (2 1/2" OD x 3/16" wall) - 3m (10')
76mm OD x5mm wall tube (3" OD x 3/16" wall) - 4m (14')

HOME : OVERVIEW : DESIGNS : ARTICLES: EMAIL


OUR CONTACT DETAILS

Click here to contact us by whatever method suits you.

This page was updated 28 November 2004