DUDLEY DIX YACHT DESIGN

 

CW 975

Multi-chine plywood

LIST OF MATERIALS FOR HULL, DECK & JOINERY

The following list of materials is approximate and intended for calculation of approximate costs. We offer no guarantees of accuracy.

Lengths and areas are based on the actual amounts to be used in the vessel without any allowance for building stocks, temporary framing, bracing etc nor for wastage in cutting to size and shape as required. Such wastage is dependent on the skill of the builder.
Marine Plywood

6mm Thick - 11sq.m - Deckhouse top (laminated)
10mm Thick - 72sq.m - Deckhouse, joinery, bulkheads
12mm Thick - 63sq.m - Hull, decks, cabin soles, rudder
25mm Thick - 2sq.m - Transom, engine beds

Philippine Mahogany or Douglas Fir

10x20mm - 1m - Framing
10x30mm - 9m - Framing, stem cover strips
10x80mm - 7m - Framing
20x30mm - 9m - Framing
20x50mm - 20m - Rubrails
25x25mm - 39m - Framing
25x30mm - 11m - Framing
25x50mm - 135m - Framing, beams, etc.
25x50mm - 12m - Beams sawn from larger
25X50mm - 5m - Beams laminated from smaller
25x75mm - 14m - Framing
30x30mm - 92m - Stringers
30x50mm - 18m - Toerails
30x75mm - 74m - Chine logs and sheer clamps
30x250mm - 9m - Keel
60x75mm - 8m - Floors at ballast keel
100x100mm - 2m - Stem
100x200mm - 8m - Skeg

Hardwood Trim, Etc

15x75mm - 30m - Fiddles, trims, etc.
20x30mm - 11m - Cockpit seats
20x50mm - 21m - Fiddles, trims, cockpit seats
30x130mm - 3m - Cockpit seats
40x80mm - 1,3m - Tiller
20x20mm - 15m - Trims
20x125mm - 12m - Companion steps, trims
20x150mm - 1,1m - Companion steps

HOME : OVERVIEW : DESIGNS : ARTICLES: EMAIL

OUR CONTACT DETAILS

Click here to contact us by whatever method suits you.

This page was updated 8 April 2004

© Web design by Dix Design