|
TIMBER LIST
The following list of materials is approximate and intended for calculation of approximate costs. We offer no guarantees of accuracy.
The list is for all timber in the construction of hull, deck and interior, including building stocks, temporary bracing etc. Allowance has been made in the quantities for wastage.
|
|
MARINE PLYWOOD 1.22x2.5m (4'x8.2') (preferably Gaboon or Okoume plywood)
9mm or 10mm (3/8") - 7 sheets
12mm (1/2") - 43 sheets
SAWN PINE (for building stocks etc)
25X50mm (1"x2") (bracing) - 10m (33')
25X125mm (1"x5") (rails) - 22m (72')
50x50mm (2"x2") (bulkhead legs) - 22m (72')
100x100mm (4"x4") (posts) - 5m (17')
SOLID TIMBER (meranti, mahogany, Douglas fir or similar, selected, free of knots, shakes fractures etc. Sizes are finished sizes.
12x30mm (1/2"x1 1/4") (washboard slides) - 7m (23')
16x116mm (5/8"x4 9/16") (framing to centreplate casing) - 2m (7')
22x22mm (7/8"x7/8") (framing, joinery cleats, trims) - 70mm (230')
22x26mm (7/8"x1 1/32") (cockpit locker framing) - 5m (17')
22x32mm (7/8"x1 1/4") (cockpit locker framing) - 2m (7')
22x44mm (7/8"x1 3/4") (berth bearers) - 10m (33')
22x100mm (7/8"x4") (hatch garage front) - 3m (10')
25x50mm (1"x2") (hatch handle) - 1m (3')
32x32mm (1 1/4"x1 1/4") (hull stringers, carlins, toerails, sundry framing) - 125m (410')
32x41mm (1 1/4"x1 5/8") (cockpit locker framing) - 2m (7')
32x44mm (1 1/4"x1 3/4") (deck stringers, sheer clamps, rubrails, hatch trimmers) - 75m (246')
32x150mm (1 1/4"x6") (framing to centreplate casing) - 1m (4')
44x44mm (1 3/4"x1 3/4") (engine well kerb) - 3m (10')
44x67mm (1 3/4"x2 5/8") (hatch coamings) - 4m (14')
44x93mm (1 3/4"x3 11/16") (Keel) - 20m (66')
100x100mm (4"x4") (Samson post) - 0.6m (2')
SOLID TIMBER FOR SPARS (Clear Douglas fir, selected, free of knots, shakes fractures etc. Sizes are finished sizes.
21x53mm (0.83"x2.09") (Mast staves) - 75m (246')
67x67mm (2.64"x2.64") (Gaff) - 5m (16')
67x100mm (2.64"x4") (Boom) - 5m (16')
91x91mm (3.58"x3.58") (Mast inserts) - 2m (7') (Can be laminated ex smaller)
100x100mm (4"x4") (Bowsprit) - 3m (10') (Can be laminated ex smaller)
RESIN & GLASS (for coatings and reinforced areas)
Epoxy resin (low viscosity 100% solids) - 60kg (132lb)
75mm (3") Wide tape - 25m (82')
100mm (4") Wide tape - 15m (49')
450g/sq.m Chopped strand mat - 5sq.m (54sq.ft)
|