DUDLEY DIX YACHT DESIGN
Caribbea 30
Timber Construction
|
LIST OF TIMBER MATERIALS FOR HULL, DECK & BULKHEADS The following list of materials is approximate and intended for calculation of approximate costs. Lengths and areas are based on the actual amounts to be used in the vessel without any allowance for building stocks, temporary framing, bracing etc nor for wastage in cutting to size and shape as required. Wastage is dependent on the skill of the builder but can be expected to be under 10% on lengths and 15-20% on plywood. |
| Multi-chine Plywood Marine Plywood 6mm Thick - 15sq.m - Deckhouse top (laminated) 12mm Thick - 86sq.m - Hull, deck, deckhouse sides, cockpit coamings, bulkheads 25mm Thick - 1 sheet - Transom Meranti, Philippine Mahogany or similar 10x25mm [0.39x0.98"] - 107m [351'] - Laminated deck beams 10x30mm [0.39x1.18"] - 22m [73'] - Laminated frames 10x60mm [0.39x2.36] - 85m [279'] - Laminated floors, stern trim 20x30mm [0.79x1.18"] - 94m [309'] - Stringers, bulkhead perimeter framing 20x150mm [0.79x5.91"] - 4m [14'] - Keelson 25x25mm [0.98x0.98"] - 68m [223'] - Framing 25x40mm [0.98x1.57"] - 32m [105'] - Deck beams 25x50mm [0.98x1.97]- 15m [50'] - Beam clamp, king plank, mast post 25x60mm [0.98x2.36"]- 4m [14'] - Floors, framing 25X75mm [0.98x2.95"] - 1m [4'] - Floors 25x80mm [0.98x3.15"] - 14m [46'] - Skeg 30x30mm [1.18x1.18"] - 16m [53'] - Floors, carlins, framing 30x45mm [1.18x1.77"] - 2m [7'] - Floors 30x50mm [1.18x1.97"] - 4m [14'] - Keel spacers 30x70mm [1.18x2.76"] - 71m [233'] - Sheer clamps, chines 30x125mm [1.18x4.92] - 9m [30'] - Keel doublers 30x200mm [1.18x7.87"] - 9m [30'] - Keel 40x40mm [1.57x1.57"] - 2m [7'] - Post 50x60mm [1.97x2.36"] - 2m [7'] - Floors 50x180mm [1.97x7.09"] - 10m [33'] - Keel deadwood 80x100mm [3.15x3.94"] - 5m [17'] - Skeg 100x100mm [3.94x3.94"] - 3m [10'] - Stem, stem knee Round Bilge Cold Molded Timber Marine Plywood 6mm Thick - 15sq.m - Deckhouse top (laminated) 12mm Thick - 44sq.m - Deck, deckhouse sides, cockpit coamings, bulkheads 25mm Thick - 1 sheet - Transom Meranti, Philippine Mahogany or similar 3mm Thick strips 100-150mm wide [1/8"x4-6"] - 168sq.m [1810sq.ft] - Hull 10x25mm [0.39x0.98"] - 107m [351'] - Laminated deck beams 10x30mm [0.39x1.18"] - 22m [73'] - Laminated frames 10x60mm [0.39x2.36] - 85m [279'] - Laminated floors, stern trim 20x30mm [0.79x1.18"] - 183m [600'] - Stringers, bulkhead perimeter framing 20x150mm [0.79x5.91"] - 4m [14'] - Keelson 25x25mm [0.98x0.98"] - 68m [223'] - Framing 25x40mm [0.98x1.57"] - 32m [105'] - Deck beams 25x50mm [0.98x1.97]- 15m [50'] - Beam clamp, king plank, mast post 25x60mm [0.98x2.36"]- 4m [14'] - Floors, framing 25X75mm [0.98x2.95"] - 1m [4'] - Floors 25x80mm [0.98x3.15"] - 14m [46'] - Skeg 30x30mm [1.18x1.18"] - 16m [53'] - Floors, carlins, framing 30x45mm [1.18x1.77"] - 2m [7'] - Floors 30x50mm [1.18x1.97"] - 4m [14'] - Keel spacers 30x70mm [1.18x2.76"] - 20m [66'] - Sheer clamps 30x125mm [1.18x4.92] - 9m [30'] - Keel doublers 30x200mm [1.18x7.87"] - 9m [30'] - Keel 40x40mm [1.57x1.57"] - 2m [7'] - Post 50x60mm [1.97x2.36"] - 2m [7'] - Floors 50x180mm [1.97x7.09"] - 10m [33'] - Keel deadwood 80x100mm [3.15x3.94"] - 5m [17'] - Skeg 100x100mm [3.94x3.94"] - 3m [10'] - Stem, stem knee |
Back to Caribbea 30
HOME : OVERVIEW : DESIGNS : ARTICLES: EMAIL
|
OUR CONTACT DETAILS |
This page was updated 26 September 2014
© Web design by Dix Design