Ankon 40 material list

DUDLEY DIX YACHT DESIGN

Ankon 40

Round bilge metal cruisers

LISTS OF MATERIALS FOR HULL & DECK

The following lists of materials are approximate and intended only for calculation of approximate costs. Theyare not intended to be used for the ordering of materials for construction.

Lengths and areas are based on the actual amounts to be used in the vessel without any allowance for building stocks, temporary framing, bracing etc nor for wastage in cutting to size and shape as required. Wastage on flat bars, tubes etc will be minimal whereas that on plate will be dependent on the skill of the builder and will be in the range of 5% to 20%.

Use 43MPa steel to BS 1449 (HR43/25), BS 4360 (43A) or similar.

MATERIALS FOR STEEL HULL AND DECK

3mm [1/8"] Plate - 49sq.m [528sq.ft]
4mm [5/32"] Plate - 52sq.m [560sq.ft]
6mm [1/4"] Plate - 18sq.m [194sq.ft]
10mm [3/8"] Plate - 1sq.m [11sq.ft]
30x6mm [1 1/4x1/4"] Flat bar - 91m [299']
40x6mm [1 3/4x1/4"] Flat bar - 125m [410']
50x6mm [2x1/4"] Flat bar - 64m [210']
38mm [1 1/2"] OD x3mm [1/8"] wall tube - 0,6m [2']
63,5mm [2 1/2"] OD x4,5mm [3/16"] wall tube - 2,0m [7']
76mm [3"] OD x5mm [3/16"] wall tube - 1,4m [5']
50x50mm [2x2"] square tube with 4,5mm [3/16"] wall - 4,3m [15']
20mm [3/4"] diam Bar - 25m [82']
30mm [1 1/4"] diam Bar - 4m [14']

MATERIALS FOR ALUMINUM HULL AND DECK

Plate is to be of alloy 5086 and extrusions are to be of alloy 5083 or their respective equivalents.

4.5mm [3/16"] Plate - 49sq.m [528sq.ft]
6mm [1/4"] Plate - 52sq.m [560sq.ft]
9.5mm [3/8"] Plate - 18sq.m [194sq.ft]
20mm [3/4"] Plate - 1sq.m [11sq.ft]
32x10mm [1 1/4x3/8"] Flat bar - 91m [299']
40x10mm [1 3/4x3/8"] Flat bar - 125m [410']
50x10mm [2x3/8"] Flat bar - 64m [210']
38mm [1 1/2"] OD x3.18mm [1/8"] wall tube - 0,6m [2']
63,5mm [2 1/2"] OD x6.36mm [1/4"] wall tube - 2,0m [7']
76.2mm [3"] OD x6.36mm [1/4"] wall tube - 1,4m [5']
50.8x50.8mm [2x2"] square tube with 6.36mm [1/4"] wall - 4,3m [15']
20mm [3/4"] diam Bar - 25m [82']
30mm [1 1/4"] diam Bar - 4m [14']

OUR CONTACT DETAILS

Click here to contact us by whatever method suits you.

This page was updated 21 March 2008