DUDLEY DIX YACHT DESIGN

 

Dix 38 & Dix 38 Pilot

Radius chine metal cruiser

LIST OF MATERIALS FOR HULL & DECK

The following lists of materials are approximate and intended only for calculation of approximate costs. They are not intended to be used for the ordering of exact quantities of materials for construction.

Lengths and areas are based on the actual amounts remaining in the vessel without any allowance for building stocks, temporary framing, bracing etc nor for wastage in cutting to size and shape as required. Such wastage is dependent on the skill of the builder.

This is a frameless boat so temporary station frames must be provided and are not included in these figures.

MATERIALS FOR STEEL CONSTRUCTION

3mm (1/8") Plate - 43sq.m (463sq.ft)
4mm (5/32") Plate - 60sq.m (646sq.ft)
6mm (1/4") Plate - 13sq.m (140sq.ft)
10mm (3/8") Plate - 0,23mx2,80m (9"x10' )
8mm (5/16") 316 S/S Plate - 0,2sq.m (2sq.ft)
30x6mm (1 1/4x1/4") Flat bar - 23m (76' )
30x8mm (1 1/4x5/16") Flat bar - 62m (204' )
40x6mm (1 1/2x1/4") Flat bar - 7m (23')
40x8mm (1 1/2x5/16") Flat bar - 168m (552' )
50x6mm (2x1/4") Flat bar - 17m (56' )
60x8mm (2 1/2x5/16") Flat bar - 10m (33' )
75x8mm (3x5/16") Flat bar - 2m (7' )
40x8mm (1 1/2x5/16") 316 S/S Flat bar - 7m (23' )
50x50x6mm (2x2x1/4") Angle - 14m (46' )
38mm OD x3mm (1 1/2X1/8") wall tube - 3m (10' )
50mm OD x4,5mm (2X3/16") wall tube - 1m (4' )
75mm OD x4,5mm (3x3/16") wall tube - 4m (14' )

MATERIALS FOR ALUMINUM CONSTRUCTION

Plate is to be of alloy 5086 and extrusions are to be of alloy 5083 or their respective equivalents.

4,5mm (3/16") Plate - 43sq.m (463sq.ft)
6mm (1/4" ) Plate - 73sq.m (786sq.ft)
9,5mm (3/8") Plate - 0,23mx2,80m (9"x10' )
20mm (3/4") Plate - 0,2sq.m (2sq.ft)
40x6mm (1 1/2x1/4") Flat bar - 7m (23' )
50X10mm (2x3/8") Flat bar - 45m (148' )
50X20mm (2x3/4") Flat bar - 7m (23' )
75x10mm (3x3/8") Flat bar - 12m (40')
76mm (3") diam Round bar - 3m (10' )
32x32x4,5mm (1 1/4x1 1/4x3/16") Angle or tee - 62m (203' )
40x40x4,5mm (1 1/2x1 1/2x3/16") Angle or tee - 145m (476' )
50x50x4,5mm (2x2x3/16") Angle or tee - 23m (76' )
38,1mm OD x6,36mm (1 1/2x1/4") wall tube - 3m (10' )
50mm OD x5mm (2x3/16") wall tube - 1m (4' )
76,2mm OD x6,36mm (3x1/4") wall tube - 2m (7')

OUR CONTACT DETAILS

Click here to contact us by whatever method suits you.

This page was updated 30 August 2002

Web design by Dix Design